Master the construction points of Geocell before you can pass the qualified project.
1.The laying surface of Geocell should be relatively flat.After the experience of the laying layer is passed,in order to prevent the longitudinal skew phenomenon,firstly,the white line or the hanging line can be drawn according to the width of the laying layer,then the Geocell can be laid and then fixed with the U-shaped nail.The end of the Geocell is 4 nails per meter wide and is evenly spaced.
2.After fixing the end of Geocell,use the laying machine or manual method to slowly push the Geocell forward,and manually straighten it 10 meters long,until a roll of Geocell is finished,and then roll the next roll.before.
3.Pick-up: Take the length of the roll as the length of the section.After the section of the Geocell is covered,check the quality of the pavement and then lay the next section.
When laying the next section,Geocell and Geocell overlap the length of one grid and use the tie line to fix it and continue to lay the second section in the forward direction.And so on,the requirements for operating Geocell are the same as before.