Wholesale Construction Roadbed Enhancement High Density Polyethylen HDPE Uni-Direction Uniaxial Plastic Geogrid

Wholesale Construction Roadbed Enhancement High Density Polyethylen HDPE Uni-Direction Uniaxial Plastic Geogrid

PP Biaxial Geogrids lies mainly in confining soil and increasing its shearing resistance by a process of interlocking between the square ribs and the soil.
Chat Now

Product Details

Over the years, we have continued to improve, in line with the spirit of dedicated craftsman, successfully developed high-quality and stable retaining wall, Uniaxial Geogrid Enviro Slope Reinforcement, geocell base course. Based on a positive, enthusiastic, and refined corporate work attitude and the corporate spirit of 'honesty, responsibility, hard work, and dedication', our company has established long-term partnerships with customers. We will continue to uphold the quality concept of 'doing things practically and behave in good faith', and repay customers with excellent product quality and sincere service. Our company has strong economic strength and offers excellent sale service. Our company has built stable business relationships with many well-known domestic companies as well as oversea customers.

Biaxial Geogrids,made in Polypropylene(PP)with their square apertures,high tensile strength and optimised geometry of nodes and ribs make them equal to any other similar material. PP Biaxial Geogrids lies mainly in confining soil and increasing its shearing resistance by a process of interlocking between the square ribs and the soil.The load dispersal effect from the interlocking mechanism is highly effective and can reduce sub-base thickness and construction cost.

 

Geogrid for Subbase of Road Construction method:

(1) Clearing the surface

Remove weeds, trees and other debris harmful to the stability of the embankment within the scope of the subgrade. For the surface ponding or pond section, the water shall be drained first, the silt shall be removed, and the qualified earthwork shall be used for backfilling and compaction.

 

(2) Compaction of original surface

The site shall be leveled and the original surface shall be compacted with impact roller. The specific compaction scheme shall be implemented according to the construction scheme of subgrade impact rolling.

 

(3) Geogrid laying in the bottom layer

The geogrid is laid in full width within the scope of subgrade. Bamboo piles (or wooden piles) are used to mark the scope of geogrid laying, and then laying. The layer of geogrid shall be flat and straight; the width of both sides shall be the same as that of subgrade. There shall be no hard protrusions such as flake stones. The joint method is adopted for connection, and the two adjacent geogrids are jointed with interwoven high-strength polypropylene tape; or lap joint method is adopted, with the lap width not less than 20cm and fixed with "U" shaped nails.

 

(4) Earthwork filling

After the geogrid is laid, fill the subgrade. In order to avoid certain damage to the geogrid caused by rolling or turning around of transport vehicles, the method of rolling filling can be used for earthwork filling. The thickness of earthwork filling shall be based on the maximum loose paving thickness of soil: the earthwork embankment shall not exceed 30cm, and the rockfill embankment shall not exceed 50cm. Bulldozer leveling, roller rolling, earth filling and rolling shall meet the requirements of Subgrade Earthwork compaction specification.

 

(5) Laying of upper geogrid

After the earthwork filling and rolling is qualified, the upper layer geogrid shall be laid. The laying requirements and connection methods are the same as those of the bottom layer, but the width shall be consistent with the top width of the filling layer.

 

(6) Filling earthwork

After the upper geogrid is laid, another layer of soil shall be filled on it as soon as possible to prevent it from being damaged or lost. The earthwork of this layer shall be filled in strict accordance with the filling thickness and rolling requirements of Subgrade Earthwork, and the loose paving thickness shall not exceed 30cm. The construction technology and construction method shall be carried out according to the subgrade earthwork filling scheme.

     
              Biaxial Geogrids              uniaxial-geogrid-enviro-slope-reinforcement26305253783

We always try our best to make each Wholesale Construction Roadbed Enhancement High Density Polyethylen HDPE Uni-Direction Uniaxial Plastic Geogrid meet the specifications of good products to better meet customer needs. We insist on taking the path of professionalism. We take 'in-depth understanding of customer wishes, constantly meet customer needs' as our service tenet to ensure the safe and stable development of the enterprise and the realization of customer benefits to the greatest extent. Our merchandise in the production process have got strictly monitored, because it is only to supply you the best quality, we'll feel confident.
Hot Tags: China geogrid for subbase of road construction manufacturers, geogrid for subbase of road construction suppliers, geogrid for subbase of road construction factory, solution, quotation, Geoweb For Flood And Water Control, Nonwoven Geotextile, Geocell For Tree Root Protection, Geocell, Fiberglass Geogrid For Asphalt Reinforcement, geocell used canal liner

Inquiry

You Might Also Like